- Thixotropic viscosity, low strength
- Easy removal, parts can be separated with hand tools
- Medium strength, thixotropic viscosity
- Controlled lubricity for accurate clamp loads
- Easy removal, parts can be separated with hand tools
- Medium strength, thixotropic
- Good oil resistance, can be used on the surface with slight oil contamination
- Controlled lubricity for accurate clamp loads
- Easy removal, parts can be separated with hand tools
- Medium to high strength, thixotropic viscosity
- Excellent chemical resistance
- Good lubricity
- Easy removal, parts can be separated with hand tools.
- Low viscosity, high strength
- Excellent chemical resistance
- Good lubricity
- Heat and hand tools are required for disassembly.
- High strength, medium to low viscosity
- Excellent chemical resistance
- Good lubricity
- Heat and hand tools are required for disassembly.
- High strength, high viscosity
- Excellent chemical resistance
- Good lubricity
- Heat and hand tools are required for disassembly.
- Low viscosity, medium strength, high penetrability
- wicking grade
- Excellent chemical resistance
- Seals 0.1mm gap welding seam, crack, dispersed shrinkage and casting microspores
- Thixotropic, low viscosity, medium strength
- Contains no fillers and will not foul pipeline system
- Thixotropic, low viscosity, low strength
- Good oil tolerance, can be used on surfaces with slight oil contamination
- Contains no fillers and will no foul pipeline system
- High viscosity, thixotropic, high strength
- Contains no fillers and will not foul pipeline system
- Suitable for large gap sealing and fast curing
- Thixotropic viscosity
- General purpose
- Excellent solvent and chemical resistance
- High strength, low viscosity
- Good oil tolerance, can be used on surfaces with slight oil contamination
- Thixotropic viscosity
- Self-curing high temperature resistant
- Maximum high strength, high viscosity
- Fixture in 5 minutes
- High strength, medium viscosity
- Enhances bonding strength
- High strength, medium to low viscosity
- Withstand high temperature to 175 °C (347 °F)
- Fixture in 5 minutes
- General purpose
- Medium viscosity
- Does not contain solvent, but highly polymerize with moisture in the air for a fast cure and high bond strength
- General purpose
- Medium viscosity
- Does not contain solvent, but highly polymerize with moisture in the air for a fast cure and high bond strength
- Fast cure
- Suitable for metal bonding
- General purpose
- Medium to low viscosity
- Does not contain solvent, but highly polymerize with moisture in the air for a fast cure and high bond strength
- Excellent lubricating properties
- Reduction of friction and wear
- Resistant to oxidation
- Extreme pressure resistance
- Wide service temperature range
- Excellent lubricating properties
- Reduction of friction and wear
- Resistant to oxidation
- Extreme pressure resistance
- Wide service temperature range
- Can be used over a wide range of temperature
- High load-carrying capacity
- Enables non-destructive dismantling, even after long use at high temperatures
- Coefficient of friction unchanged in the area of oiled bolts, even after several bolt re-tightening and loosening processes
- Good corrosion protection
- Designed to be running-in lubricant
- Does not require burnishing
- Quickly evaporates and allow sprayed parts to be used within seconds
- Has a high service temperature
- Highly effective oxidation inhibitors
- Resistant to corrosion and vibration
- Resistant to contraction and expansion
- Ensures rapid and easy assembly of threaded parts
- Prevents seizing and galling
- Reduces wear in areas of high friction
- Withstands temperature from -40°C to 1100°C
- Contains nickel, aluminium and graphite in a non-melt base
- Contains corrosion and oxidation inhibitors
- Resistant to acids and ammonia
- Recommended for use when copper cannot be present
- Paste lubrication up to 230°C (446°F), dry lubrication up to 400°C (662°F)
- Good water resistance
- Good volatilization properties
- Compatible with many types of elastomers and plastics (test for compatibility)
- High pressure-absorption capacity
- Low coefficient of friction
- Prevents frictional corrosion and scoring
- Protection from stick-slip
- Good anti-corrosion properties
- Reduces frictional corrosion
- Simplifies dismantling processes
- High surface covering capacity
- Increases load-carrying capacity, reduces friction, wear and noise
- Lowers oil operating temperatures and stops gear pitting
- Solid lubricant particles are small enough to pass through all common filter types
- Increases load-carrying capacity, reduces friction, wear and noise
- Lowers oil operating temperatures and stops gear pitting
- Solid lubricant particles are small enough to pass through all common filter types
- Non-toxic, stiff silicone compound
- Strong adhesion and non-melting properties and maintains consistency over wide temperature range
- Resistant to many chemicals and gases and has low evaporation rate
- Suited to a wide range of applications, including bearings, gears, and sliding parts.
- Lithium soap greases have excellent water resistance and shear stability.
- Versatile greases recommended for general and wide applications.
- Containing heat-resistant molybdenum disulphide (MoS2) and graphite
- Reduce seizure even at high temperatures applications
- Low viscosity ester oil base, which has outstanding low torque and low friction properties.
- Exceptional lubricity lasts for long periods of time over a wide range of temperatures
- High pressure resistance
- High wear protection
- Extremely adhesive
- Resistance against water
- Electronic and electrical cleaner
- Grease and Oil removing agent
- Heavy duty evaporating cleaner and degreaser
- Specially formulated for diverse surface cleaning
- Remove pitch ta, adhesives, heavy oil stains
- Form a glossy clear layer to protect surface
- Applicable for various machine parts
- High zinc content
- High adhesion strength on surfaces
- Protective zinc surface coating
- Stops squeaks
- Loosen rusty, frozen and sticky parts
- Protects against rust and metal corrosion
- Removes moisture
- Designed to be running-in lubricant
- Does not require burnishing
- Quickly evaporates and allow sprayed parts to be used within seconds
- Has a high service temperature
- Seals, lubricates, protects, insulates and waterproofs
- Safe on most rubber and plastics
- Chemical, oil and water resistant
- Temperature resistant
TOP
Download Product Catalogue 2019
53 Ubi Avenue 1, #05-25 Paya Ubi Industrial Park, Singapore 408934
