PETROLATUM WRAP PROTECTION

SEALXPERT UNDERWATER PETRO PASTE

FEATURES:

  • Petrolatum based compound
  • Contains no Volatile Organic Compounds
  • Can be applied by inexperienced personnel
  • No shut downs or cure time is necessary

APPLICATION:

  • Can be applied to marginally prepared surfaces (SSPC SP 2-3)
  • Applied to very wet or underwater surfaces
  • May be applied underwater by gloved hand, stiff bristle brush or roller
  • Preparation of metal surfaces underwater prior to the application of SealXpert Petro Tapes

TECHNICAL DATA:

Solid content : 100%
Flash point : 180 °C ( 356 °F)
Specific gravity : 1.08
Specific volume : 925 cc/kg
Coverage : 2-5mm²/kg
Temperature range :  
For application : 5 °C (41 °F)
For service : -25 °C to 50 °C (-13 °F to 122 °F)

SEALXPERT UNDERWATER PETRO PASTE

5544 Sealxpert Petro Paste - PETROLATUM WRAP PROTECTION (EN)

PACKAGE:

  • 2.5kg pails
  • 25kg drums
Download PDF download pdf - PETROLATUM WRAP PROTECTION (EN)

SEALXPERT PETRO TAPE

FEATURES:

  • Non-hardening and non-cracking
  • Highly resistant to mineral acids, alkalis, salts and micro-organisms
  • Highly impermeable to water, water vapour and gases
  • Used for the protection of buried or exposed pipes, rods, cables, valves and metal fittings from corrosion

APPLICATION:

  • Protection of surfaces, mains, cables and all metal work, both below and above ground
  • Water proofing seal for temporary cable joints and openings
  • Protection of grafts in horticulture
  • Repair and protect such items as gutters, down pipes, cracks in asbestos roofing
  • Seal glazing bars and cracks in glass

TECHNICAL DATA:

Dielectric strength : 250 Volts/mil
Thickness : 1.1 mm
Breaking strength : 7,200 N/m
Elongation at break : 20 %
Flash point : 40 °C (104 °F)
Water vapour transmission : 1.0 Ng/Pa.S.m²
Petrolatum components : 60 %
Drop melting points : 84 °C (183 °F)
Cone penetration : 6.3 nm

SEALXPERT UNDERWATER PETRO PASTE AND PETRO TAPE APPLICATION PROCEDURE:

1
5546 111a - PETROLATUM WRAP PROTECTION (EN)

1. Priming pipes, rods and cables. Apply SealXpert Underwater Petro Paste to entire area to be wrapped with tape.
2
5546 111b - PETROLATUM WRAP PROTECTION (EN)

2. Apply SealXpert Petro Tape. Start at the 9 o’ clock position. Ensure that the compound side of tape is to the substrate.
3
5546 111c - PETROLATUM WRAP PROTECTION (EN)

3. Starting a new roll of tape. Overlap ends of tape by one tape width.
 
4
5546 111d - PETROLATUM WRAP PROTECTION (EN)

4. Overlapping each turn by 55% gives a double thickness.

SEALXPERT PETRO TAPE

5545 Sealxpert Petro Paste 2 - PETROLATUM WRAP PROTECTION (EN)

PACKAGE:

  • 2” x 33’ (50 mm x 10 m)
  • 4” x 33’ (100 mm x 10 m)
  • 6” x 33’ (150 mm x 10 m)
  • 8” x 33’ (200 mm x 10 m)
Download PDF download pdf - PETROLATUM WRAP PROTECTION (EN)